The flow meter is specced at 3/8" push on fitting so that's a good place to start because the pumps have no specification given.
Having looked it it, it might make sense to think about some clips but lets not spend cash needlessly for now, wait for normal cables ties to fail.
The flow meter also says that it should have a pre-filter for 80 microns, that is 0.08mm. "Mesh 200" is 0.075mm so this size is the most appropriate.
I have found some mesh on ebay which is £2.99 per 15cm x 15cm sheet but there are also various inline ones, a fuel filter for instance but that's £17.99
No comments:
Post a Comment